M14/M305 EBR Trigger and Hammer Set

M14 EBR Combo.jpg
M14 EBR Combo.jpg

M14/M305 EBR Trigger and Hammer Set

347.50

Complete set of the Shooting Sight EBR Adjustable trigger, the NM Speed-hammer, and the tool steel pins.

National Match Prepped, this trigger/hammer are the only M1 / M14 trigger parts to ever offer drop-in NM performance, with no modifications or grinding required, along with a 25% reduction in lock time (hammer swing time).    

Polished, ground, and fully hardened sear edges will release the hammer like breaking a glass rod.  A hard / low friction surface coat makes the trigger pull butter smooth and eliminates wear.    

Lock time is the time between when the trigger releases the hammer, and the hammer hits the firing pin.  That's time during which the rifle is typically swinging off-target.  Especially in offhand shooting, if shots are broken as you are moving 'off-target', that time can cost points.  The ShootingSight NM Hammer is machined from billet steel to be light weight, reducing polar moment by 40%, and optimizing geometry for speed. Lock time is reduced 35% from 8.5ms to 5.5ms; which is as fast as a mil-spec hammer on an AR-15.

Trigger sear edges are ground and polished to be sharp before an ultra hard and low friction surface coating is added.  The result is a smooth trigger pull, and a clean break which will not wear.  Adjustments are added for second stage sear engagement, as well as for trigger pull weight, allowing adjustment to a minimum of 4.5lb for NRA/CMP competitions.

Quantity:
Add To Cart

All parts are true 'drop-in' on USGI spec trigger housings with no additional fitting, polishing, or tuning required on the parts or on the rifle.