Malkoff Devices M361-LMH (Low-Med-High) to Fit SureFire & Elzetta

M614.jpg
M611.jpg
M613.jpg
M614.jpg
M611.jpg
M613.jpg

Malkoff Devices M361-LMH (Low-Med-High) to Fit SureFire & Elzetta

105.65

This design utilizes a custom orange peel reflector designed by Don McLeish. The reflector offers a very nice balance between throw and spill. It is an outstanding room lighter and short to medium spotter. It will easily illuminate objects at 350+ feet and will blind opponents within a 100 foot radius.  

It was designed specifically for use in Malkoff MD2, Elzetta ZFL-M60, and SureFire 6P, 6Z, C2, M2, and G2 flashlights. It may or may not fit other models. The input voltage is 3.4-6 volts.  Below 3.4 volts it will drop out of regulation and run direct drive.  This dropin is protected from reverse polarity.  The LED is a cool (6200K) white Cree XP-G2.

Quantity:
Add To Cart

Summary of Modes: 

15 lumens/80 lumens/400 lumens 

Current Draw:  50 ma/270 ma/1450 ma

Mode of Operation:

The switch debounce time is 150 milliseconds.  The mode will advance each time the light is momentarily activated and the switch debounce time has passed.

If the light is left on for more than 1 second, the next off/on cycle will return the light to low.  If the light is not left on for 1+ seconds the next off/on cycle will advance the mode.  The off time has no relation to the mode switching of the light.  In most normal use, the light will always come on in low.

Please note that if you are using this module to upgrade an Elzetta Flashlight you will need the Lens & Gasket Kit for Malkoff Devices found HERE

If you are using it with a with a shock-absorbing head (ie Surefire M2) the you will require a Fitting Ring for Surefire Shock Absorbing Heads found HERE