Elzetta Tailcaps

Elzetta Tailcaps.jpg
Elzetta Tailcaps.jpg

Elzetta Tailcaps

from 48.29

Use these tail caps to extend the function of you flashlight, move seamlessly from defensive (strobe) to EDC (High/Low) to Weapon Light (Tape Switch).

The tailcaps are compatible with the full line of Elzetta Flashlight, except for the standard High/Low switch that should not be used in the Alpha lights due to the reduced power requirements.

Tailcaps:
Quantity:
Add To Cart

Rotary

Momentary activation is achieved by pressing the pushbutton. 

Constant On is achieved by rotating the Tailcap fully clockwise. 

Some operators consider this design to be "Tactically Correct"

Click Switch

Momentary activation is achieved by pressing the pushbutton lightly. 

Constant On is achieved by pressing the pushbutton firmly until it 'Clicks'.

 Pressing firmly again will Click the Light off. 

High/Low

Activation is achieved exactly like the Clicky Tailcap  in either the High or Low mode. 

High Output (235Lumens) occurs when the Tailcap is rotated fully Clockwise (screwed all the way on). 

 Low Output (~15 Lumens) occurs when the Tailcap is rotated Counter-Clockwise (unscrewed) anywhere from 1/8 to 1/2 rotation from the High position.

A simple, intuitive User Interface with great versatility. 

High/Strobe

The High/Strobe Tailcap operates exactly like the High/Low Tailcap only a high-frequency Strobe replaces the 'Low' mode.

The simple user interface requires no multiple clicks to operate, no confusing menus to navigate, and no precise movements or detents to manipulate.

Unlike competitive units, this Tailcap does not draw any current when not in use and will not drain batteries while in storage.

The Strobe function can disorient an assailant and is an excellent option for self defence.

Tape Switch with 5-inch Cable

The Remote Tape Switch provides operation of the light via a molded pressure pad.

Elzetta's unique constant-on feature allows hands-free operation.

Fail-safe constant-on feature remains fully functional even if pressure pad is damaged or cable is severed.

5-inch cable works well with vertical fore grips & applications where hand placement is near the flashlight.

Tape Switch with 12-inch  Cable

The Remote Tape Switch provides operation of the light via a molded pressure pad.

Elzetta's unique constant-on feature allows hands-free operation.

Fail-safe constant-on feature remains fully functional even if pressure pad is damaged or cable is severed.

12-inch cable is great for longer barreled weapons or where a greater distance exists between the operator's hand and the flashlight.


All Elzetta lights are made using 6061-T6 Aluminum with Mil-Spec Type III Hard Anodized finish.

The Electronics of every Elzetta light is fully potted meaning that they are fully enclosed and totally waterproof.

Elzetta Flashlights use 2 or 3 (Depending on Model) CR123A batteries which are included with purchase.

Made in USA.